Products

The Maxxwave MW-RA-USG was redesigned to fit the Ubiquiti USG perfectly. Sold in white or black powder coating.Mount your MikroTik RB/450 or Ubiqui...

Maxxwave N-Male to N-Male patch cable 3 feet (1 meter) high quality RFC240 outdoor-rated cable

Connect your Ubiquiti airMAX Products to Standard N Connector Antennas Made with high performance, high quality RG-58U outdoor rated cable. Exce...

Maxxwave Routermaxx Vengeance 3 Replacement Power Supply

The Maxxwave MW-APCSG SC/APC simplex adapter is capable of connecting to SC/APC type single mode connections.Product Features Terminal Type SC / A...

As optical passive devices, FS attenuators are mainly used in fiber optic to debug optical power performance & optical instrument calibration c...

This Maxxwave pigtail is an SC/APC single mode 1.25mm 1 meter product. These pigtails are great for improving your cable management, and giving you...

Product Features Terminal Type SC / UPC Type Simplex Mode Single Mode

This Maxxwave pigtail is an SC/UPC single mode 0.9mm 1 meter product. These pigtails are great for improving your cable management, and giving you ...

This is highly cost-effective way to connect two SFP/SFP+ devices for short distances, within racks or across adjacent racks. They provide a low po...

This is highly cost-effective way to connect two SFP/SFP+ devices for short distances, within racks or across adjacent racks. They provide a low po...

Crimp on RJ45 8P8C Network Cable Connectors with metallic outer shell for reduced signal interference and Gold platted 3-prong contacts for UTP Ca...

Crimp on Cat6 RJ45 8P8C Network Cable Connectors with metallic outer shell for reduced signal interference and Gold platted 2-prong contacts for U...

Crimp on Cat6A RJ45 8P8C Network Cable Connectors with metallic outer shell for reduced signal interference and Gold platted 3-prong contacts for ...

MW-SM-UPC-UPC-1M Maxxwave Single Mode Fiber Patch Cable - SC/UPC - SC/APC - 1 meter lengthProduct Features· A cost effective solution that provides...

The Maxxwave single-mode 10Gbit SFP+ fiber module enables uncompromised high-speed routing with our new fiber solutions. The modules are small-form...

The MW-1270+SM-20K is an up to 10.7Gbps Single Mode optical SFP+ module with a LC connector, 1270nm/1330nm DFB, that works for connections up to 20...

The MW-1330+SM-20K is an up to 10.7Gbps Single Mode optical SFP+ module 1330nm/1270nm DFB, that works for connections up to 20km.Compatible with Ma...

The new Maxxwave single-mode fiber module enable uncompromised high-speed routing with our new fiber solutions. The modules are small-form-factor p...

The new Maxxwave MW-1315-WDM-SM-PAIR is a pair of SFP fiber modules.The MW-1315-SM-US is a 1.25G Single Mode optical SFP module with a LC connector...

The MW-1315-SM-US is a 1.25G Single Mode optical SFP module with a LC connector, TX1310nm/RX1550nm, that works for connections up to 20km and suppo...

The MW-1513-SM-US is a 1.25G Single Mode optical SFP transceiver with an LC connector, TX1550nm/RX1310nm, which works for connections up to 20km an...

Broke that jumper cable during your Ubiquiti antenna installation? No problem, we have a spare one for you! The Maxxwave MW-IP67CA-RPSMA-30 RP-SM...

Colors may vary. These super-adhesive ABS plastic PCB stand-offs will make your MikroTik RouterBOARD or any other PCB mount to just about anywhere...

This MikroTik unit is a direct upgrade of the previous 10G SFP+ 10km module: more functionality for the same price. MikroTik has added 25G SFP28 su...

The MikroTik R11e-2HPnD is a high power wireless card in miniPCI-e format. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapt...

Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) without a hassle - this cable has integrated QSFP28 modules. Just plug it in and...

To complement their SFP cage equipped devices, MikroTik is now offering several SFP optical fiber transceivers that are compatible and tested with ...

The MikroTik UP1302C-12 is a 12V 10.8A internal power supply for CRS326-24S+2Q+RM and CCR1036 series (only for new r2 revisions with dual power sup...

The MikroTik GB60A-S12 is a replacement 12V 5A Internal Power Supply for the CCR1016 series (only for new r2 revisions, with dual power supplies), ...

The MikroTik SolidRack 10 [SR-10U ] is a 19” 10U desktop rack with adjustable angle and additional space for cable management. Mount it under the t...

The MikroTik XS+2733LC15D is a pair of 1G/1.25G SFP, 10G SFP+, 25G SFP28 Bi-Di DDM Single Mode Fiber Transceiver Modules.The modules can be used as...

The MikroTik SMASMA is a 1m SMA male to SMA male cable, that can be used to connect your LTE card (with ACSMAUFL pigtail) to an external antenna if...

The MikroTik 1U Chassis Bracket for CWDM 8-Port MUX/DEMUX Unit [CWDM-CHASSIS-2] is a 1U Chassis bracket that can hold two CWDM-MUX8A units.

RMK-2/10 allows installing two of the smaller MikroTik form-factor devices within traditional 19-inch racks, such as our neat and handy SR-10U!Alte...

The MikroTik RouterBOARD 1100x4 is a 13x Gigabit Ethernet ports Router, powered by Annapurna Alpine AL21400 CPU with four Cortex A15 cores, clocke...