Tycon Power 5 Port High Power POE Gigabit Switch

The TP-SW5G-24 power over ethernet (PoE) 10/100/1000MB switch offered by Tycon Power Systems is a fully automatic high speed 5 port Ethernet switch with up to 35W of PoE power per port. It complies with the IEEE802.3af/at specifications for valid PoE device detection. The unit supplies power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote device. The switch accepts DC power from 12-36VDC which makes it an excellent choice for those systems powered by battery power. There are 2 power inputs for attachment of primary and backup power sources. It also accepts 802.3af or 802.3at power through port 5. Product Specifications • Ethernet standard: IEEE802.3/IEEE802.3u • Ports: 1 data/PoE input and 4 data/PoE, automatic crossover and polarity • Transmission speed: 1000Mbps/100Mbps/10Mbps auto-negotiation • Switch technology: store and forward • Protocol: CSMA/CD • Flow control: IEEE802.3x(full-duplex), back pressure(half-duplex) • Data transmission rate: 1488000pps for 1000baseT, 148800pps for 100baseT, 14880pps for 10baseT • Address Table: 1K MAC, self-learning • Connections: Shielded RJ45 • PoE Output Ports: Port 1-4, auto power management pin assignment: TX(1,2), RX(3,6), V+(4,5), V-(7,8) • Maximum PoE power: Up to 35W per port; max 70W per 5 port switch • PoE auto detection: IEEE 802.3af, 802.3at • PoE protection: Over temperature, over current, over/under voltage • Data surge protection: IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact), IEC61000-4-4 (EFT) 40A (5/50ns) , IEC61000-4-5 (lightning) 20A (8/20μs • DC power input: 24VDC (12V to 36V), dual DC inputs, reverse polarity protected. Also accepts PoE power input on port 5 This product does not include a power supply, you must purchase a separate power supply. Product Features • High power 10/100/1000MB PoE switch • Remotely power equipment through Cat5 cable up to 100m • Up to 2A per port • Built-in surge protection • Automatic MDI/MDI-X crossover • Automatic speed and duplex sensing • 1K self learning MAC address table • Compact size • High temperature operation • CE and FCC certification Product Applications: • Wireless access points and client devices • IP phone and security camera systems • Power multiple devices from 1 data cable Technical Data Sheet: TP-SW5G-24 Data Sheet TP-SW5G-24 User Manual